Forum Replies Created
Firstly you would need to run the number at a APSA event.
Then when you run a number you need to get weighed in front of a APSA
delegate or committee member.
Then email your time card into Pistol for recognition.
Hope this helps you.
Rules are rules Mincer.
Tristan the max deck height will only allow none raised cam tunnels
for all V8″s.
Yes their is no cube limits but the is a deck height limit which
will stop cubes at a point.
IE chev approx 648 cubes , Ford 698 cubes with hemi heads as seen on T & M’s car
I could be wrong and would have no problem
being corrected but I’m sure he had to put weight into
the car to be 2700. He welded a solid square bar in the
front end. He could have been lighter.
He ran 2 plate kits on a sheet metal manifold [no foggers] with a aspirated converter.
6.97 @ 200mph
HewyNovember 12, 2014 at 2:00 am in reply to: Roll call ! APSA Grand Finals 29th Nov Sydney Dragway #12622
Entrants so far
Mat GRUBISA NSW 707 OUTLAW TEN FIVE 10 5 CHEV
Andrew SANDERS VIC 2620 OUTLAW TEN FIVE 10 5 CHRYSLER
Jef CUTAJAR VIC 1714 OUTLAW TEN FIVE 10 5 DODGE
Simon KRYGER NSW 1940 OUTLAW TEN FIVE 10 5 CAMARO
Drago NIKODIJEVIC VIC NA DYO DYO CHEVROLET
Alon VELA NSW 1674 DYO DYO FORD
James BARNES NSW 3684 DYO DYO FORD
Tony ARMAO NSW 4360 DYO DYO MAZDA
Frank OLIVERI QLD 3593 DYO DYO CHEV
Frank PALUMBO NSW 2072 DYO DYO HOLDEN
John BECKINGHAM NSW 3090 DYO DYO FORD
Gery SARAFOGLOU NSW 4897 OUTLAW EXTREME EX HOLDEN COMMODORE UTE
Stew WALSH QLD 4148 OUTLAW EXTREME EX CHEVROLET
Robin TAYLOR VIC 1670 OUTLAW EXTREME EX CHEV
Colin WILSHIRE QLD 2101 FACTORY EXTREME FX MITSUBISHI
Paul CIBOTO VIC 4174 MOD STRET MSB FORD
Guy HAL QLD MSB2049 MOD STRET MSB MERCEDES BENZ 1969
Kery DEMETRIOU NSW 3938 MOD STRET MSU HOLDEN
Michael KALAITZAKIS VIC 565 OUTLAW RADIAL OR TOYOTA
Glen EMPSON VIC 328 OUTLAW RADIAL OR HOLDEN
Dany BUSBRIDGE VIC 5756 OUTLAW RADIAL OR HOLDEN
Andrew MICALEF VIC 5483 OUTLAW RADIAL OR HOLDEN
Pery BULIVANT NSW 3262 OUTLAW RADIAL OR HOLDEN
Dion AMATO VIC 2569 OUTLAW RADIAL OR FORD
Daren MOOD NSW 408 OUTLAW RADIAL OR FORD
Dom LUPINO VIC 1385 OUTLAW RADIAL OR FORD
Marc LEAKE NSW 198 OUTLAW RADIAL OR HOLDEN
Steve BEZINA VIC 423 OUTLAW RADIAL OR FORD
Tim CROS QLD 3135 OUTLAW RADIAL OR FORD
Craig HEWIT NSW 3649 PRO STRET PSB HOLDEN
ATURA BLACKTOWN CHAMPIONSHIPS ROUND 8
Saturday, October 04, 2014
DRIVER / RIDER
APSA ENTRANT LIST AS AT 1-1-14 Page 1Michael MCGRATH VIC 1831 PRO STRET PSB HOLDEN
Daren MOODY NSW 1232 PRO STRET PSB HOLDEN
Glen FORSTER VIC 5741 PRO STRET PSB FORD
Chris STEVERMUER NSW 254 PRO STRET PSU HOLDEN
Tony NICOLACI VIC 5067 PRO STRET PSU HOLDEN
Daryl ELIOT NSW 535 TRUE STRET TS HOLDEN
Elias SEMAN NSW 2754 TRUE STRET TS FORD
Domenic DAGOSTINO VIC 38 TRUE STRET TS HOLDEN
Carolyn TZORTZAS NSW 4893 TRUE STRET TS HOLDEN
Nathan GHOSN NSW 4957 TRUE STRET TS FORD
Tristan TRICAS NSW 2493 X275 X275 FORD
Mick DARKE NSW 107 X275 X275 HOLDEN
Adam STYLES NSW 532 X275 X275 HOLDEN
Jay GOODWIN QLD 595 X275 X275 FORD
Tery SENG QLD 1534 X275 X275 HOLDEN
Quentin FEAST VIC 4767 X275 X275 HOLDEN
David ROGERS NSW 457 X275 X275 HOLDEN
Douglas DAY QLD 1308 X275 X275 CALAIS
Kon MICHALOUDAKIS NSW 3131 X275 X275 FORD
Anthony WEB QLD 397 X275 X275 HOLDEN TORANA
Robert HOGAN NSW 390 X275 X275 HOLDENNovember 9, 2014 at 8:16 pm in reply to: Roll call ! APSA Grand Finals 29th Nov Sydney Dragway #12619
Entered and I will see you all their.
I would like to say a big thanks to you Simon for all the
sleepless nights and days that you have had since you and
Johnny Habib and Johnny Wilson decided to give APSA
and its members some where to call home.
You are a major part of what APSA is today and for this I thank you.
Also I would like to welcome Ray Treasure into the APSA family.
I’m sure that you will bring a lot of knowledge to the ever growing APSA family.
Thanks Simon and see you at the track soon.
My old VL had an under dash willwood brake pedal
and it worked fine.It took me 4-6 hrs to work out how to fit it.
My new car has a floor mount willwood pedal.
Rocket sell them as do others I’m sure.
Depending on which state you are in.
Well done Pazzo and crew.
Congrats Pistol the car looked tops.
And all from a small block.
Congrats on taking the Xmas tree as well.
Well done Scotty HOLDEN
All the years of hard work pays off.
2.1 Engine transplants allowed
2.2 All power adder engines must be of OEM configuration ( Ie: factory release Dimensions And conventional cylinder heads) Raised Cam, widended pan rail, after market aluminium blocks and tall deck blocks not permitted.
Nos 400 this is what it actually states in the X275 section.
True in every word Johnny.
What an event , lots of new cars and so many more new cars coming and
a lot of cars that are getting a rebuild ready to come back out as well.
If that doesn”t get people motivated to either build , bye , up grade or bring back
out their cars then nothing will.
A big congrats to all that turned up and to all the winners and men and woman
who ran PB’S.
I cant wait for November to arrive as I think that will be the meeting
of all meetings with record numbers for all class’s after speaking to so
many people over the weekend about cars that are going to be ready around that time.
Back to the shed as I have a lot to do to get mine ready for that meeting.
Entry list is up.
We need more entries guys/girls so were are you all.
Thanks bent 8 , somebody else also suggested Matt as well.
I’ll give him a call.