Home › Forums › APSA MEMBERS FORUM › Technical Section › x275 single turbo sizing
This topic contains 3 replies, has 4 voices, and was last updated by Anonymous 6 years, 4 months ago.
hi is there any chance of raising the single turbo sizing for x275 from a 80mm to a 91 mm
A single 80mm can run well below 8.0’s at 3200lb, no need for a 91mm.
Just a slight increase !
91mm would be fine if the bump stop was lower, US X275 has a whole range of sizing allowed with a weight break to suit your size and only single turbo allowed, next voting not to far away 😮
You must be logged in to reply to this topic.