Home Forums APSA MEMBERS FORUM Technical Section twin turbo bonnet ideas?

This topic contains 2 replies, has 2 voices, and was last updated by  Fopar 7 years, 10 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #1345

    Fopar
    Member

    am getting bit of fibreglass work done on the bonnet, am putting in some NACA style ducts, question is i have seen some guys do a hood over the top and some that don’t. is it worth doing the hood with the ducts? case in example PSIDUP doesn’t even have the ducts

    MrMad Torana has both ducts and bulge cover

    also same goes for intake pip/manifold does it need to be covered at high speeds so the air can’t come in under the bonnet? this is what im working with. because of the angle of the bonnet can’t think of anything that would suit it in the way of a reverse cowl etc. possibly some sort of air splitter at the front of the pipe, push the air around it a little or over it? oh n yeah that is a swan pot holder in the background 😆

    #9462

    DEBENZ
    Participant

    Swan air diffuser / hood ornament for sure!!!

    #9471

    Fopar
    Member

    @DEBENZ wrote:

    Swan air diffuser / hood ornament for sure!!!

    😆 a swan is very graceful and just glides thru the air. i better get on that idea before someone else jumps on it and makes millions 😛

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.