Home Forums APSA MEMBERS FORUM New Cars and In the Build New Member saying hi

This topic contains 13 replies, has 8 voices, and was last updated by  xypwr123 9 years, 6 months ago.

Viewing 14 posts - 1 through 14 (of 14 total)
  • Author
    Posts
  • #483

    Kranki540
    Member

    Hey Guys

    Just joined up

    looking at getting into the drag racing scene

    I am Currently building a HJ Kings’y Ute looking to go into pro street racing

    I am still looking into catagories in witch the ute falls into.

    Cheers Daniel

    #3673

    1phat8
    Member

    hey daniel, fancy seeing you here…….

    #3674

    doz08z
    Member

    Hi Daniel,

    Welcome mate pleasure to have you. The UTE looks tuff and ready for action. Hurry up and get it ready we have shootouts comming!!!!!
    Let us know some spec’s eg: engine, estimated ETS and other info etc
    Cheers 😉

    #3676

    BADSLE
    Member

    hey bud,

    ute looks the goods, great to have another member …

    #3677

    col palmer
    Member

    g/day mate…….what do we have to do to talk you outta the bottles & into a couple of turbo’s ? 😆

    #3678

    BOTLFED
    Member

    ^^^^^^^A Top Fuel Budget would help^^^^^^^^^^

    #3679

    col palmer
    Member

    @BOTLFED wrote:

    ^^^^^^^A Top Fuel Budget would help^^^^^^^^^^

    top fuel is for pussies………

    #3769

    Kranki540
    Member

    Hey guys

    Good to be on the site it will be good to pick up some experience into drag racing.

    It would be awsome to have a topfuel budget!!!

    Maybe next build

    Engine specs are

    540 BB Chev Tall Deck

    AFR Alloy Heads
    TRE Competion Manifoild
    Twin 1050 Dominators
    350hp shot of gas to start
    12-1 Compresion
    Moroso Dry sump setup

    Natrully aspirated Hp 850-950

    On gas 1200-1300hp

    Car weighs approx 4000pounds Heavy nugget (at least it wont twist inside out)

    Car has full 4 Link rear end with 9″

    12 Point roll cage

    rear rails modified

    Cross members modified

    Drag tyres are 15.5 tread width and 16″ bag width, 31″ tall

    Running turbo 400

    What categories will the ute fall into???

    I want to start organising to get my licence

    My brother just picked up 1Phat8 old ute with a big block- the old owner is a member of the site he just bought the HG Monaro

    We are going to start racing that before my ut is ready.

    Hopefully the ute will be ready next powercruise at eastern creek. Fingers crossed

    #3773

    BOTLFED
    Member

    It would be awsome to have a topfuel budget!!!

    Like Col………. 😆

    #3776

    col palmer
    Member

    @BOTLFED wrote:

    It would be awsome to have a topfuel budget!!!

    Like Col had before he wrote 1 car off & had to start again from scratch ………. 😆

    see , i knew you would understand 😐

    #3781

    BENT 8
    Member

    @Kranki540 wrote:

    Hey guys

    Good to be on the site it will be good to pick up some experience into drag racing.

    It would be awsome to have a topfuel budget!!!

    Maybe next build

    Engine specs are

    540 BB Chev Tall Deck

    AFR Alloy Heads
    TRE Competion Manifoild
    Twin 1050 Dominators
    350hp shot of gas to start
    12-1 Compresion
    Moroso Dry sump setup

    Natrully aspirated Hp 850-950

    On gas 1200-1300hp

    Car weighs approx 4000pounds Heavy nugget (at least it wont twist inside out)

    Car has full 4 Link rear end with 9″

    12 Point roll cage

    rear rails modified

    Cross members modified

    Drag tyres are 15.5 tread width and 16″ bag width, 31″ tall

    Running turbo 400

    What categories will the ute fall into???

    I want to start organising to get my licence

    My brother just picked up 1Phat8 old ute with a big block- the old owner is a member of the site he just bought the HG Monaro

    We are going to start racing that before my ut is ready.

    Hopefully the ute will be ready next powercruise at eastern creek. Fingers crossed

    well well look what the cat dragged in…………………………..:mrgreen:

    #3782

    Kranki540
    Member

    hey buddy

    Yeah brad got me on the site.

    How is the progress on ur engine going any luck

    #3789

    BENT 8
    Member

    @Kranki540 wrote:

    hey buddy

    Yeah brad got me on the site.

    How is the progress on ur engine going any luck

    Fuel system is on its way and should be here next week, the crank is done so it should be sent in the next few days.
    Will give ya a call on the weekend

    #3868

    xypwr123
    Member

    Hi champ i have noticed the car your building and suprisingly its similar to a project that i am building for a freind.
    bbc 572 tall deck
    tre manifold (how was the finishing work on taylors manifold)
    bre carbie 1050 single
    injet nos
    afr heads cnc
    est hp is 950 and 1400 on gas
    car is hj sedan
    question i have is do you have pics of the manifold clearance out of the bonnet do you think a 6 nch cowl will do.

Viewing 14 posts - 1 through 14 (of 14 total)

You must be logged in to reply to this topic.